F.A.Q

.

Why we need the "surveillance camera"?

Surveillance camera can protect your family's child and old person's safety or it can record who go into your home and doing some thing when you go out. (Some camera have record function, otherwise need record card )
Our surveillance camera you can put inside clock, radio, or other covert environment. Human's eye is very difficult to detect.

.

What're the difference between a wired camera and a wireless camera?

A wired camera needs a cable connect the camera to a TV or monitor. The image signal is passed through the camera, through the cable, and arrive your TV or monitor, then allows you to watch the video (audio). All wired cameras must use cable to connect the camera.

A wireless camera does not need cable connects the camera to the TV or monitor. The image signal is transmitted through the air to the TV or monitor directly, or to a receiver.

.

How to the wireless camera work?

Like telephone, there have two kinds of telephone, wired telephone and wireless one. Only different is processes that how deal with transmit information with method. Therefore, the wireless camera is also same, they are depend on "the electromagnetic wave"come to arrive that the wireless audio and video.
Our wireless system includes transmitter, receiver plus your display device to be allowed to work.

.

What are different between CCD and CMOS ?

Both CCD or CMOS image sensors are electronic devices that use a variety of technologies to transform an image into an electric image. In the process of reading the value in the image, CCD sensors supply high-quality, low-noise images. but CCDs consume lots of electric power. CMOSs operate on lower voltage and therefore consume much less power. So CMOS have much longer battery life than CCDs.
Other difference between these two sensors is that the manufacturing costs of CCD much more expensive than CMOS.
Based on these differences,. There is a higher image quality but higher power consumption (CCD) compared with lower image quality but longer power consumption (CMOS).

.

What is PAL. NTSC and Secam?

PAL , NTSC, and Secam is mode of receive the signal.
NTSC (National Television Standards Committee) is a standard used in North America and Japan . PAL a standard used almost everywhere else in the world, SECAM is used separated around the world and can be found in France, parts of Greece, Eastern Europe, Russia, Africa and a few other parts of the world.
If your TV/VCR/camcorder support multi-systems, you can use either PAL or NTSC camera
NTSC and PAL standard are not interchangeable. For example, you can't display video input from a PAL camera on a NTSC

.

What is the camera resolution and Lux mean?

Resolution is a measurement unit of the camera's clarity. The resolution is high, the camera image is better clearer. "Lux" can affect account of light .If you want see clear under the low light, the more lower the "Lux" ,the more better one.

.

Do you supply OEM or ODM work?

Yes, we can supply both kinds of works. You just send us your art work and logo we can make it as you want. But this has minimum quantity limited. Above attached work 's expenses you should bear ( Negotiation)

.

Do you offer free sample ?

As our first customer we do not give any free sample to them . The sample charge will give back when you order bigger quantity again.